Technology

SlimCat is Kordz' family of ultra slim 28AWG category cabling and cabling products.

28 American Wire Gauge, also referred to as 28AWG, refers to the thickness of the conductors used inside a cable. 28AWG refers to a conductor being 0.32mm thick in its total diameter.

Category 6 is the sixth generation of twisted pair Ethernet cabling that is used in Ethernet and other network data communication. The CAT6 standard specifies performance of a minimum 250MHz or 1 Gigabit per Second data transfer speeds. CAT6 must meet more stringent specifications for crosstalk and system noise than CAT5 and CAT5E.

RJ45 stands for 'Registered Jack 45'. This means that the cable, connector, or product uses standardised networking interface. RJ45 standard is most commonly seen in networking and
ethernet cables, connectors, sockets etc.

PoE++ or Power over Ethernet is an electrical industry standard which allows power to be transmitted simultaneously with data signals over CAT cable, allowing devices to operate without
the need of a separate power supply. Maximum power per port: PoE++ provides up to 100watts at 52-57v, PoE+ provides up to 30watts at 50-57V, PoE provides up to 15.4 watts at 37-57V

The Un-Shielded tech icon means that the associated cable or product does not have any form of shielding applied to it's construction.

UL94 is a plastics flammability standard. The UL94 V-0 Classification specifies that the plastic material tested must not have any flaming drips produced and must stop burning within 10
seconds during a vertical burn.

The Kordz Lifetime Warranty means that the associated product is covered under warranty and promises maintained product functionality and performance for your lifetime. Refer to www.kordz.com.au/warranty for more information.

  • Product outline

    • Enables delivery of ANSI/TIA-568.2-D Cat 6 permanent link performance up to 50m when paired with Kordz PRO Series SlimCat™ CAT6 Network Cables
    • Contacts and wire manager customised for 28AWG conductors
    • Easy to terminate with metal latching mechanism
    • ABS clamshell design
    • IEEE802.3bt 100W PoE++ capable
    • UL94 V-0 fire-rated
    • Eco-friendly packaging
    • Available in black and white
    • Lifetime warranty
  • Technical info

    GENERAL INFORMATION

    Connector Part No.: T2R45S-C6XU-XX
    Guaranteed Performance Category: Category 6
    Applicable Standards: ANSI/TIA-568-C.2
    Housing Material: Polycarbonate
    Flammability Rating: UL 94 V-0
    Contact Material: Copper
    Contact Plating IDC: Phospher bronze, Tin Plated
    Contact Plating RJ45: Gold Plating 50µ” [1.27µm]
    Housing Colour: White / Black
    Shielding Type: Unshielded
    Operating Temperature: -40° to 66°C

    MECHANICAL

    Keystone Body Length: 37.33mm | 14.7in
    Keystone Body Width: 17.10mm | 6.7in
    Keystone Body Height: 23.68mm | 9.3in
    Panel Mating Height: 16.10mm | 6.3in
    Panel Mating Width: 14.50mm | 5.7in

    ELECTRONIC

    Voltage/Current rating UL Applications: 125 Volts AC / 1.5 Amps
    Dielectric Withstanding Voltage: 1500 Volts DC / AC Peak
    Contact Resistance: ≤ 20mΩ
    Insulation Resistance: ≥ 500MΩ
    RJ45 Cycle: 750 times
    Insertion IDC: 20 times
    Wire Gauge Min/Max: Min: 26AWG / max: 23AWG
    Conductor Diameter: Max:8.5mm Ø
    Cable Jacket Diameter Max: 6.5mm Ø

  • Warranty

    The Kordz PRO Series SlimCat™ CAT6 Toolless Keystone Socket comes with our product Lifetime Warranty that promises maintained product functionality and performance for your lifetime.

  • Reviews

    No reviews yet, for the meantime would you take one minute to leave a feedback about your experience?

    Reviews

    There are no reviews yet.

    Be the first to review “PRO Series SlimCat™ CAT6 Toolless Keystone Socket”

    Your email address will not be published. Required fields are marked *

    Leave a Review
  • Downloads

PRO Series SlimCat™ CAT6 Toolless Keystone Socket

The Kordz PRO Series SlimCat™ CAT6 Toolless Keystone RJ45 Socket is designed specifically for use with the Kordz PRO Series SlimCat™ CAT6 Network Cable, enabling professional integrators to deliver ANSI/TIA-568.2-D CAT6 permanent link performance up to 50 metres. Featuring an ABS clamshell in either black or white and a toolless metal latching mechanism, the PRO Series SlimCat™ Keystones support PoE++ at 100W and fit standard keystone panel cut-outs. Match with the Kordz SlimCat™ CAT6 Crimp Connector & Strain Relief for a complete Kordz ecosystem that delivers ‘Connectivity Assured’.

 

Select Colour Option:

  • Description
  • Order
  • Price (AUD$)
  • Product Code
  • Stock Level
  • Carton's QTY
  • Box of 12, Black

    117.00 (incGST) T2R48J-C6XU-BK In stock
  • Box of 12, White

    117.00 (incGST) T2R48J-C6XU-WH In stock

Frequently asked questions about product

Support and Resources

Industry news, insight and innovation.
Subscribe for more from Kordz.

Name(Required)
Name(Required)
This field is for validation purposes and should be left unchanged.
0
    0
    Your Cart
    Your cart is empty