- Our Range
-
-
Browse by Product Category
-
-
-
Browse by Brand
-
-
-
-
- Inside Kordz
- Resources
- Where to Buy
- Contact Us
Application Standards:
ANSI/TIA-568.2-D
IEC11802
EN50173
PoE++ 80W
Performance Standard:
≤ 10.0m – Category 6 Component Tested
> 10.0m – Category 6 Channel Tested
Wiring method: T568-B
Certified Data Rate: 1 Gbps (Gigabit ethernet)
Supported Data Rate: ≥ 1 Gbps (Gigabit ethernet)
Certified Bandwidth: 1 to 250 MHz
Supported Bandwidth: ≥ 250 MHz
Cable Diameter: 28 AWG, 3.9mm/0.15ӯ
Maximum Cable Pulling Tension: 80 kgf/cmÇ
Cable to Plug Tensile Strength: TBC
Cable Bend Radius: 11.7mm | 0.46in
Recommended Total Mounting Depth: 27.7mm | 1.09in
Mating Cycles (max.): 1000 cycles
Temperature range: UL Temp rating – 75ºC
Conductors: Solid 28 AWG Oxygen Free Stranded Copper
Conductor Insulation: Polyolefin
Shielding: Not Applicable
Cable Jacket Material: UL CM-rated PVC
Connector Material: Nylon
Contact Type: 3-prong for solid/stranded conductors
Strain Relief: Injection-moulded PVC
Conductor Resistance: 223Ω/km
Insulation Resistance: 10MΩ min @100V DC
No reviews yet, for the meantime would you take one minute to leave a feedback about your experience?
Leave a ReviewThe Kordz PRO Series Cat6 Network Patch Cords, now bulk packaged in installation-friendly and 100% recyclable, BeltPak Bulk Packaging.
The Kordz PRO Series Cat6 Network Patch Cords are engineered to deliver all the power of Cat6 in half the size. A 28AWG, 3.9mm cable diameter, and a small profile nylon composite connector featuring the snap-proof latch that withstands 2,000 bend cycles, allow these cables to offer unprecedented space-saving advantages without compromising the guaranteed 1 Gbps and PoE++ 100W performance.
Individually Packaged: PRO Series CAT6 Patch Cord
0.15m, Black, 180pcs
0.25m, Black, 160pcs
0.5m, Black, 120pcs
1.0m, Black, 100pcs
1.5m, Black, 80pcs
2.0m, Black, 80pcs
0.15m, Blue, 180pcs
0.25m, Blue, 160pcs
0.5m, Blue, 120pcs
1.0m, Blue, 100pcs
1.5m, Blue, 80pcs
2.0m, Blue, 80pcs
For Cat6 runs, the maximum length is 328 feet. Two walls jacks are connected to the patch panel by 295 feet of solid cable, and 16 feet of stranded cable runs between the two jacks.
The plugs on the ends of Ethernet cables can be used between 1,000 and 2,000 insertions.
Ethernet Cat6 cables are backward compatible with other cables and use twisted pair connections. Crosstalk and noise specifications for Cat6 cables are more stringent than Cat5 and Cat5e cables. Performance can also be specified up to 250 megahertz (MHz) with a CAT6 cable.
Every type of Ethernet cable has an outer jacket containing four twisted pairs of wires. The twisting of the cable prevents any interference that would otherwise occur within the pairing.
Ethernet cables connect technological devices together through a local area network. They are most commonly found attached to computers, routers, televisions, game consoles, and switches.
Reviews
There are no reviews yet.