RJ45 stands for 'Registered Jack 45'. This means that the cable, connector, or product uses standardised networking interface. RJ45 standard is most commonly seen in networking and
ethernet cables, connectors, sockets etc.

24 American Wire Gauge, also referred to as 24AWG, refers to the thickness of the conductors used inside a cable. 24AWG refers to a conductor being 0.51mm thick in its total diameter.

This product is equipt with the Kordz Snap Proof Nylon Latch.

Category 6 is the sixth generation of twisted pair Ethernet cabling that is used in Ethernet and other network data communication. The CAT6 standard specifies performance of a minimum 250MHz or 1 Gigabit per Second data transfer speeds. CAT6 must meet more stringent specifications for crosstalk and system noise than CAT5 and CAT5E.

PoE++ or Power over Ethernet is an electrical industry standard which allows power to be transmitted simultaneously with data signals over CAT cable, allowing devices to operate without
the need of a separate power supply. Maximum power per port: PoE++ provides up to 100watts at 52-57v, PoE+ provides up to 30watts at 50-57V, PoE provides up to 15.4 watts at 37-57V

The Un-Shielded tech icon means that the associated cable or product does not have any form of shielding applied to it's construction.

UL94 is a plastics flammability standard. The UL94 V-0 Classification specifies that the plastic material tested must not have any flaming drips produced and must stop burning within 10
seconds during a vertical burn.

The Kordz Lifetime Warranty means that the associated product is covered under warranty and promises maintained product functionality and performance for your lifetime. Refer to www.kordz.com.au/warranty for more information.