Technology
-
Product outline
NV-IP-JP4-TX-10: 1Gb 4K30 HDR, 2K30 Multi-Stream Encoder
- 4K HDR video encoding not surpassing 850Mbs
- Connected device control via IR, RS-232-CEC
- 2K30 Low Bandwidth Real-time-stream-protocol (RTSP) including stereo audio
- Content Plus+ distribution modes, including:
- Embed live content to digital signage platforms & control interfaces.
- High-quality 2K30 audio-video decoding through wired & wireless applications (VLC)
- Personal device streaming with audio and source control using NetvioGo
- Capture live content seamlessly for internet broadcasting using live production software.
- Analog & Digital Audio encoding
- USB Type A connectivity for peripheral device connection.
NV-IP-JP4-RX-10: 1Gb 4K30 HDR Decoder & Video Wall Processor
- Processes landscape and portrait video walls up to 16×16
- Onboard 4K/2K scaling allowing support for legacy displays
- Ultra-low latency including Genlock synchronization between decoders
- Enhanced compatibility mode tailored for video conferencing hubs, laptops and commercial displays
- ARC Capture & Routing
- Connected device control via IR, RS-232-CEC
-
Application
-
Technical info
Audio | Video
- Supports HDMI2.0b 18Gb HDMI input signal.
- Compliance up to HDCP2.2
- Max Video Transmission 3840×2160 30fps 4:2:0 8bit
- Video signal over LAN not exceeding 850Mbs
- Supports 4K 30Hz 4:2:0 8bit HDR
- IP Preview (RTSP) Main Output 1920×1080 30fps + LPCM 2.0 audio
- IP Preview Sub Output 960×580 30fps
- Enhanced compatibility mode ideal conference hubs, laptop & commercial display integration.
- HDMI Loop Out (TX) 3840×2160 60fps 8b 4:4:4
- HDR Compatible including HDR10, HLG, HDR10+ & Dolby Vision
- Scaler capable of 4K to 2K
- End to Latency = 1 video frame
- LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master, DTS:X
- Audio connectivity from HDMI or Analog connectivity.
- Ability to embed additional audio source to HDMI signal via encoder.
Electrical & Mechanical
Product Approvals: CE, UKCA, FCC, RoSH
Product Dimensions: W: 205mm x D: 100m x H: 22mm
Package Dimensions: W: 255mm x D: 157mm x H: 77mm
Unit Weight: 500g
Package Weight: 900g
Power: IEEE 802.3af (10watts max per device).
Operating temperature: -20 ºC to 60ºC
Storage temperature: -20ºC to 60ºC
BTU: 30 Btu/hr nominalSoftware & Control
- Compatible with Netvio360 for discovery, configuration, security, management & routing.
- Independent control signal routing of IR, RS-232 & CEC.
- Available control system drivers include Crestron, Control4, Savant, RTi, Elan & Q-sys.
- Onboard Netvio-Go-Control, a license-free app, provides a compelling alternative to traditional control systems. Tailored for a streamlined and less complex AV experience.
- Onboard IR & RS-232 ports, with signal routing via control system.
- USB KVM
Box Contents:
- Encoder or Decoder device
- Wall mounting brackets
- Phoenix connectors for RS-232 and audio
- IR TX & IR RX Accessories.
Works with:
- IP-JP4-CL-10 (Secure IP Terminal/Controller)
- IP-RK-10 (Rack)
- IP-SW-24P-10 (Network Switch)
- IP-SW-48P-10 (Network Switch)
- TS-13-10 (Touch Panel)
Approved Network Switches:
- Netvio IP-SW Series
- Netgear AV Line
- Cisco Catalyst, SG & CBS Series
- Draytek P Series
- Araknis 210, 310 Series
- Cambium EX2000 & EX3000 Series
- Plus more layer 2 managed switches compatible
-
Warranty
Netvio 5-year standard product warranty.
-
Reviews
No reviews yet, for the meantime would you take one minute to leave a feedback about your experience?
Leave a Review -
Downloads
Netvio JP4 4K30 Encoder (TX) & Decoder (RX)
JPEG2000 1Gb | 4K30 HDR | 1080p preview | Video Wall | IR | RS-232 | CEC | USB2.0 KVM
The workhorse of AVoIP, Netvio’s JP4 series is a high performance JPEG2000 encoder and decoder system allowing for 1Gb IP streaming of 4K HDR 4:2:0 content from various HDMI media sources direct to display connections. Delivering a multi-functional AVoIP solution for all of your audio, data, video, KVM, video wall and control needs.
FREE Software & Control:
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
Select Colour Option:
- Description
- Order
- Price (AUD$)
- Product Code
- Stock Level
- Carton's QTY
-
4K30, Encoder
1,810.00 (incGST) NV-IP-JP4-TX-10 Call us -
4K30, Decoder
1,810.00 (incGST) NV-IP-JP4-RX-10 Call us
Related Products
Netvio JP4-60 4K60 4:4:4 Encoder (TX) & Decoder (RX)
Netvio JP4-60 4K60 4:4:4 Encoder (TX) & Decoder (RX)
1Gb | 4K60 4:4:4 | 1080p preview | Video Wall | IR | RS-232 | CEC | USB2.0 KVM
Netvio’s premium AVoIP solution, the JP4-60 series delivers pixel-for-pixel quality, faster & smoother switching, and lower latency. Provides the ultimate viewing experience ideal for today’s larger screen formats or close content viewing applications.
This high performance AVoIP encoder and decoder system allows for 1Gb IP streaming of 4K60 HDR 4:4:4 content from various HDMI media sources direct to display connections. Delivering a multi-functional AVoIP solution for all of your audio, data, video, KVM, video wall and control needs.
FREE Software & Control:
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
Netvio JP4-60-DNT Dante AV-A Encoder (TX) & Decoder (RX)
Netvio JP4-60-DNT Dante AV-A Encoder (TX) & Decoder (RX)
1Gb | 4K60 4:4:4 | Dante AV-A |1080p preview | Video Wall | IR | RS-232 | CEC | USB2.0 KVM
In a strategic alliance with Audinate, Netvio fully embraces the new standard in audio and video compatibility through the launch of Netvio’s JP4-60-DNT series AVoIP encoders and decoders. The DNT devices ensure top-tier video quality up to 4K60 4:4:4 Resolution, with independently routable audio and video flows, facilitating Compatibility with installed DSPs, amplifiers, or speakers. Also delivering data, video, KVM, video wall and control functionality.
Used in two distinctive modes, the DNT encoders and decoders can operate exclusively within Dante’s new AV-A managed solution or be part of a traditional Netvio-based configuration workflow.
FREE Software & Control:
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
Netvio 19″ Universal 6U Rack Mount
Netvio 19″ Universal 6U Rack Mount
Netvio’s rack mount is an essential accessory for all JP4 series AV over IP systems.
The 19” universal rack mounting solution has been designed specifically for Netvio’s range of AVoIP devices. Having a rack space of 6U, it is capable of mounting up to ten devices.
Offering beneficial space saving and providing the correct spacing between devices to achieve passive airflow management, keeping the Netvio AVoIP system working reliably.
All Netvio AVoIP devices use the same chassis footprint regardless of function or technology. Rack kit comes complete with all accessories.
Netvio 24 Port PoE+ AVoIP Network Switch
Netvio 24 Port PoE+ AVoIP Network Switch
Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.
The 24 Port AvoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 21 encoders and/or decoders, requiring zero configuration.
All ports support PoE+ 30W, with a PoE budget of 450W, to power devices connected to all ports simultaneously.
The IP-SW-24P-10 is designed and suitable for systems with 21 or less AVoIP endpoints only, with 1 port reserved for Network Lan & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.
Multiple IP-SW-24P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.
FREE Software & Control:
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
Netvio 48 Port PoE+ AVoIP Network Switch
Netvio 48 Port PoE+ AVoIP Network Switch
Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.
The 48 Port AvoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 45 encoders and/or decoders, requiring zero configuration.
All ports support PoE+ 30W, with a PoE budget of 950W, to power devices connected to all ports simultaneously.
The IP-SW-48P-10 is designed and suitable for systems with 45 or less AVoIP endpoints only, with 1 port reserved for Network LAN & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.
Multiple IP-SW-48P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.
FREE Software & Control:
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
Featured Installs
Support and Resources
-
Product support
Get in touch with a product specialist
-
Find Distributor
Connect with distributors around the world
-
News and insight
Deep dive with industry leading insight and updates
Reviews
There are no reviews yet.