Netvio AvoIP Devices
Netvio AV Over IP Devices
Filter
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
- Netvio360 (PC, Mac) – Discovery, configure, optimise, design, control
- NetvioGO (iOS, Android) – Full spectrum end user AV control
-
No products matching those filter options within this category
Netvio JP4 Series Centralised Controller
Netvio JP4 Series Centralised Controller
The central brain for JP4 AVoIP systems, Netvio’s JP4 Series Centralised Dual Network Controller provides a multi-functional package being the single point for auto-discovery of up-to 192 endpoints making large installs a breeze. The CL can send mass updates including end point (TX or RX) settings and firmware updates at a single button press. The CL combined with Netvio’s configuration software makes it the fastest solution to install.
Traffic isolation of AV controls and LAN is achieved by the dual network ports (AV LAN & Control LAN) offered by this controller avoiding complex network configurations such as VLAN and allowing for PoE to power the device.
FREE Software & Control:
Netvio JP4 4K30 Encoder (TX) & Decoder (RX)
Netvio JP4 4K30 Encoder (TX) & Decoder (RX)
JPEG2000 1Gb | 4K30 HDR | 1080p preview | Video Wall | IR | RS-232 | CEC | USB2.0 KVM
The workhorse of AVoIP, Netvio’s JP4 series is a high performance JPEG2000 encoder and decoder system allowing for 1Gb IP streaming of 4K HDR 4:2:0 content from various HDMI media sources direct to display connections. Delivering a multi-functional AVoIP solution for all of your audio, data, video, KVM, video wall and control needs.
FREE Software & Control:
Netvio JP4-60 4K60 4:4:4 Encoder (TX) & Decoder (RX)
Netvio JP4-60 4K60 4:4:4 Encoder (TX) & Decoder (RX)
1Gb | 4K60 4:4:4 | 1080p preview | Video Wall | IR | RS-232 | CEC | USB2.0 KVM
Netvio’s premium AVoIP solution, the JP4-60 series delivers pixel-for-pixel quality, faster & smoother switching, and lower latency. Provides the ultimate viewing experience ideal for today’s larger screen formats or close content viewing applications.
This high performance AVoIP encoder and decoder system allows for 1Gb IP streaming of 4K60 HDR 4:4:4 content from various HDMI media sources direct to display connections. Delivering a multi-functional AVoIP solution for all of your audio, data, video, KVM, video wall and control needs.
FREE Software & Control:
Netvio JP4-60-DNT Dante AV-A Encoder (TX) & Decoder (RX)
Netvio JP4-60-DNT Dante AV-A Encoder (TX) & Decoder (RX)
1Gb | 4K60 4:4:4 | Dante AV-A |1080p preview | Video Wall | IR | RS-232 | CEC | USB2.0 KVM
In a strategic alliance with Audinate, Netvio fully embraces the new standard in audio and video compatibility through the launch of Netvio’s JP4-60-DNT series AVoIP encoders and decoders. The DNT devices ensure top-tier video quality up to 4K60 4:4:4 Resolution, with independently routable audio and video flows, facilitating Compatibility with installed DSPs, amplifiers, or speakers. Also delivering data, video, KVM, video wall and control functionality.
Used in two distinctive modes, the DNT encoders and decoders can operate exclusively within Dante’s new AV-A managed solution or be part of a traditional Netvio-based configuration workflow.
FREE Software & Control:
Netvio 24 Port PoE+ AVoIP Network Switch
Netvio 24 Port PoE+ AVoIP Network Switch
Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.
The 24 Port AvoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 21 encoders and/or decoders, requiring zero configuration.
All ports support PoE+ 30W, with a PoE budget of 450W, to power devices connected to all ports simultaneously.
The IP-SW-24P-10 is designed and suitable for systems with 21 or less AVoIP endpoints only, with 1 port reserved for Network Lan & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.
Multiple IP-SW-24P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.
FREE Software & Control:
Netvio 48 Port PoE+ AVoIP Network Switch
Netvio 48 Port PoE+ AVoIP Network Switch
Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.
The 48 Port AvoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 45 encoders and/or decoders, requiring zero configuration.
All ports support PoE+ 30W, with a PoE budget of 950W, to power devices connected to all ports simultaneously.
The IP-SW-48P-10 is designed and suitable for systems with 45 or less AVoIP endpoints only, with 1 port reserved for Network LAN & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.
Multiple IP-SW-48P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.
FREE Software & Control:
Netvio 19″ Universal 6U Rack Mount
Netvio 19″ Universal 6U Rack Mount
Netvio’s rack mount is an essential accessory for all JP4 series AV over IP systems.
The 19” universal rack mounting solution has been designed specifically for Netvio’s range of AVoIP devices. Having a rack space of 6U, it is capable of mounting up to ten devices.
Offering beneficial space saving and providing the correct spacing between devices to achieve passive airflow management, keeping the Netvio AVoIP system working reliably.
All Netvio AVoIP devices use the same chassis footprint regardless of function or technology. Rack kit comes complete with all accessories.