MSol Test Equiptment
- 1 x License
- 1 x USB Cable Test Module (UCT)
- 1 x USB-C Male to USB-A Female Adapter
- 1 x HDMI Cable Test Module
- 1 x Looper Module
- 1 x DC Resistance Module
- 1 x Looper Module
- 1 x MS-TestPro transmitter module – HDBaseT Spec 2.0
- 1 x MS-TestPro receiver module – HDBaseT Spec 2.0
- 1 x MS-TestPro 106B unit
- 1 x MS-TestPro transmitter module – HDBaseT Spec 1.0
- 1 x MS-TestPro receiver module – HDBaseT Spec 1.0
- 1 x 12.6V 3A charger with AU, US, UK & EU territory clips
- 1 x Remote termination block
- 1 x Ruggedised carry case
-
No products matching those filter options within this category
MSolutions – AV over IP Upgrade License
MSolutions – AV over IP Upgrade License
The MSolutions AV over IP network capability test module license further enhances the extensive testing capabilities of the MS-104B MS-TestPro with the added benefit of qualifying a CATx link for the increasingly popular AV over IP method for AV distribution.
This optional tester module license provides the integrator a snapshot of the AVoIP switch configuration for MAC / IP addresses ping time and current config, present nodes on the network with Simple Network Management Protocol (SNMP Information). IGMP snooping capabilities allow for transparency of VLAN set up, and immediate / fast leave settings.
View MSolution’s Training Videos Here
Package contents:
All MSolution prices are subject to change without notice, due to fluctuating exchange rates.
Price displayed is indicative only. Quotes will be provided at the time of purchase.
MSolutions – UCT – USB Test Module
MSolutions – UCT – USB Test Module
The MSolutions USB cable test module allows for integrators to gain a deeper understanding of their USB connectivity through qualification of the cabling used within installations. The tester allows for the DC measurement of the internal wiring.
The module has the capability to measure the power consumption of a USB device by connecting the module between the USB device and the Host – which will allow for the user to view the power draw by the device from the Host.
Determine the USB-C features: USB2.0 (480Mbps), USB3.1 (Gen1 up to 5Gbps), USB3.1 (Gen2 up to 10Gbps), charging, monitor/laptop power, audio support, video and quality.
Test measurements for USB cable types: USB-C to USB-C, USB-C to USB3.0 (Type A), USB3.0 (Type B) to USB3.0 (Type A). The tester will identify and qualify the USB version that the cable has been manufactured to (i.e. 1.0, 1.1, 2.0, 3.0, DP, ETH)
View MSolution’s Training Videos Here
Package contents:
All MSolution prices are subject to change without notice, due to fluctuating exchange rates.
Price displayed is indicative only. Quotes will be provided at the time of purchase.
MSolutions – HCT – HDMI Test Module
MSolutions – HCT – HDMI Test Module
The HDMI Cable Test Module enables ProAV integrators to easily evaluate cabling compatibility to the HDMI standard – including bandwidths (48Gbps / 18Gbps / 9Gbps / 4.5Gbps), resolutions (HDR, UHD, HD), passive cable wiring quality, pin connectivity, and CEC support.
The addition of these modules to MSolutions’ industry-leading HDBaseT testing device, offers an end-to-end ProAV testing solution from source to sink with its efficient, time-saving HDMI cable testing modules.
View MSolution’s Training Videos Here
Package contents:
All MSolution prices are subject to change without notice, due to fluctuating exchange rates.
Price displayed is indicative only. Quotes will be provided at the time of purchase.
MSolutions – DCR – DC Resistance & Looper Modules
MSolutions – DCR – DC Resistance & Looper Modules
The optional MS-TestPro DC Resistance and Looper modules, can be used to qualify the DC resistance of a CATx link, and to check the cables ability to provide a sufficient level of PoH (Power over HDBaseT) or or PoE (Power over Ethernet) to the IEEE 802.3bt standard.
The DCR will check for:
1. Loop Resistance which represents the DC loop resistance in Ohm (Ω) of a cable, and is calculated as the sum of the DC resistance of the two conductors in a pair.
2. Parallel DC Resistance Unbalanced for the parallel resistance of the CATx two conductors in each cable pair. For each pair, the difference is expressed in ohms (Ω).
3. Pair-to-Pair Resistance Unbalanced which is the difference in DC resistance between all four twisted pairs in the cable. For each pair, the difference is expressed in ohms (Ω).
View MSolution’s Training Videos Here
Package contents:
All MSolution prices are subject to change without notice, due to fluctuating exchange rates.
Price displayed is indicative only. Quotes will be provided at the time of purchase.
MSolutions – HDBaseT Spec 2.0 Modules
MSolutions – HDBaseT Spec 2.0 Modules
The new Spec. 2.0 MS-TestPro expansion module, enables users to test and certify all the added functions and capabilities of HDBaseT Spec. 2.0 systems with the same unsurpassed level of quality and reliability that the MS-TestPro is known for among HDBaseT 1.0 installers and integrators.
HDBaseT Spec. 2.0 is the most recent and technically advanced profile for HDBaseT systems. Where HDBaseT 1.0 addresses only the physical and link layers of HDBaseT switching, Spec. 2.0 adds networking, switching, and control-point capabilities. Among other enhancements, it improves performance margin and optimizes existing infrastructures and bandwidth.
View MSolution’s Training Videos Here
Package contents:
All MSolution prices are subject to change without notice, due to fluctuating exchange rates.
Price displayed is indicative only. Quotes will be provided at the time of purchase.
MSolutions – MS-TestPro – HDBaseT™ Tester
MSolutions – MS-TestPro – HDBaseT™ Tester
The MS-TestPro MS-104B is the only HDBaseT™ certified tester that is all-inclusive, 100% reliable and portable, making it an indispensable tool for AV installers and integrators. It enables AV professional the ability to carry out start-to-finish analysis of entire HDBaseT™ systems in the field, providing detailed results and certification documents for clients.
HDBaseT™ monitoring, logging, full signal diagnostic functionality, and a built-in HDMI test pattern generator, the MS-TestPro provides vital cable infrastructure testing with unrivalled troubleshooting capabilities for the integrator. Moreover, the MS-TestPro allows the reports to then be transferred to a computer, tablet or smartphone for use by both installer and end-user which saves businesses significant time and money on HDBaseT™ installations.
View M-Solution’s Training Videos Here
MS-TestPro package contents:
All MSolution prices are subject to change without notice, due to fluctuating exchange rates.
Price displayed is indicative only. Quotes will be provided at the time of purchase.