Netvio 24 Port PoE+ AVoIP Network Switch

Product outline

24P | 1Gb | PoE+ | 1U | Plug & Play | AVoIP Network Switch (zero configuration)

24Port 100/1000 Base-TX: Fully Configured for Netvio JP4 Series
Supports up to 21 end-point devices (encoders or decoders)
3 Ports reserved for IP-JP4-CL-10 connection (2no.) & primary LAN or Router (1no.)
450W PoE Capable across all 24 Ports
Max PoE per port: 30W

Technical info

Switch:

24 x 100/1000 Base-TX RJ45 Ports | Fully Configured for Netvio JP4 Series
Supports up to 21 end-point devices (encoders or decoders)
3 Ports reserved for IP-JP4-CL-10 connection (2no.) & primary LAN or Router (1no.)
450W PoE Capable across all 24 Ports
Max PoE per port: 30W

Delivery:

Separate multicast group IPs for audio, video, infrared, serial, CEC, USB.
Link manager via single multicast group IP from query device – response via unicast.
Default API channel via unicast, secured using SSH protocol.
Preview, Unicast RTSP protocol for media management of audio/video.

End to End Latency:

HDMI: (HDMI passthrough) zero frames.
HDMI path using compatible decoder = 1 video frame.
HDMI path using compatible decoder with scaling = 2 video frames.
Preview: ~1s (varies, no fixed clock) + decoder latency

Drivers & Control:

Drivers available for control systems including C4, Crestron, RTi, Elan, Savant & Demopad
Discovery, configure, optimise, design via Netvio 360 utility.
Full spectrum AV control via FREE NetvioGO application for Apple & Android devices.

Power Supply:

450W PoE – IEEE 802.3af, IEEE802.3at compliant.

Weight & Dimensions:

Height: 46mm (1U)
Width: 440mm (without rack ears)
Depth: 200mm
Weight: 2.26kg

Temperatures:

Storage: 20°C / +60°C | 20% – 90% RH
Operating: 0°C / +40°C | 20% – 90% RH

In the Box:

Netvio IP-SW-24P-10
IEC Power Cord (AU)
Rack mounting brackets and screws
Four switch rubber feet

Regulations:

Safety Approvals:
– CE
– UKCA
– FCC
– RoSH

Reviews

No reviews yet, for the meantime would you take one minute to leave a feedback about your experience?

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Netvio 24 Port PoE+ AVoIP Network Switch”

Leave a Review

Netvio 24 Port PoE+ AVoIP Network Switch

Netvio’s network switches are the ultimate solution for AVoIP systems, offering unparalleled convenience with their zero-configuration required solution. Allowing integrators to effortlessly set up AVoIP networks, eliminating the usual complexities associated with AVoIP network configurations.

The 24 Port AvoIP Network Switch is a dedicated plug ‘n’ play AVoIP Switch that has been preconfigured for use with Netvio and other AV over IP solutions. The pre-configuration for multicast AVoIP solutions, supports systems with up to 21 encoders and/or decoders, requiring zero configuration.

All ports support PoE+ 30W, with a PoE budget of 450W, to power devices connected to all ports simultaneously.

The IP-SW-24P-10 is designed and suitable for systems with 21 or less AVoIP endpoints only, with 1 port reserved for Network Lan & 2x ports reserved for NV-IP-JP4-CL AV and Control connections.

Multiple IP-SW-24P-10 switches cannot be chained/used in the same system unless they are completely isolated systems. It is only designed to connect to AVoIP encoders and decoders.

FREE Software & Control: